Rotational Ti-Base (CAD/CAM) MIS® Compatible SP Hex

This rotational (non-indexed) CAD/CAM Ti-Base is designed for MIS® SP Hex platforms using Internal Hex 2.42 mm. The non-indexed interface suits multi-unit, screw-retained frameworks/bridges, allowing rotational freedom during prosthetic seating. Machined from Titanium Grade 5 (Ti-6Al-4V) for strength and biocompatibility, it ships with a matched prosthetic screw. Use within validated digital workflows and follow your implant system IFU for torque/driver selection.

Includes: 1× Ti-Base (rotational), 1× Prosthetic Screw
Material: Titanium Grade 5 (Ti-6Al-4V)
Compatibility: MIS® Standard Platform (SP), Internal Hex 2.42 mm (third-party compatible; verify interface/fit)

FAQs

Is this Ti-Base compatible with MIS® SP (Standard Platform) Hex?

Yes. It’s designed for MIS SP Hex with Internal Hex 2.42 mm. Always verify interface and fit before use.

When should I choose a rotational (non-indexed) Ti-Base?

Use rotational for multi-unit bridges/frameworks where orientation is not fixed. For single-unit crowns requiring fixed orientation, choose an anti-rotational (indexed) Ti-Base.

Is this intended for screw-retained restorations?

Yes—primarily screw-retained CAD/CAM frameworks. Follow your restorative plan and lab protocol.

What torque and driver should I use?

Follow the implant system IFU for prosthetic screw torque and driver. Do not exceed manufacturer limits.

Can it be sterilized and reused?

Follow labeling/IFU. If supplied non-sterile, clean and steam-sterilize before use. Components are single-patient use; replace worn screws.